Roofing Fiberglass Mesh

GALAXYFIBER Roofing Fiberglass Mesh is manufactured from alkali-resistant glass fiber yarn with a specialized coating. It delivers excellent adhesion, flexibility, and weather resistance, making it ideal for flat roofs, pitched roofs, roof decks, terraces, and roof renovation projects.

• Extreme Weather Endurance – Engineered to withstand prolonged UV exposure, heavy rain, snow, and freeze-thaw cycles on exposed roof surfaces.
• High-Temperature Stability – Maintains structural integrity under intense rooftop heat, where surface temperatures can exceed 70°C in summer.
• Thermal Stress Resistance – Absorbs the expansion and contraction caused by day-night temperature swings, preventing reflective cracking in roofing layers.
• Wind Uplift Reinforcement – Anchors roofing membranes and coatings against wind uplift forces on flat and low-slope roofs.
• Bitumen & Coating Compatibility – Bonds reliably with bituminous membranes, acrylic, polyurethane, and cementitious roof coatings.
• Ponding Water Resistance – Retains strength and adhesion in areas prone to standing water and prolonged moisture exposure.
• Dimensional Stability Under Thermal Cycling – Resists shrinkage and elongation over repeated heating and cooling cycles, keeping the roofing system dimensionally locked.
• Long Service Life – Extends the maintenance interval of roofing waterproofing systems, reducing re-roofing frequency and lifecycle cost.

Custom weights (60g – 120g), mesh sizes (20x10 to 5x5), widths, lengths, and colors available upon request.

• Inner Packing: PE shrink film per roll.
• Outer Packing: Woven bags, cartons, or pallets.
• Roll Length: 50m, 100m, or 200m.
• Roll Width: 1m standard, custom available.
• Custom Packaging: Labels, core size, palletizing available.
• Delivery: Within 15–20 days for one 20' container.

1. Surface Preparation – Clean and level the roof substrate.
2. Apply Base Coat – Spread a uniform layer of waterproof coating or bitumen (approx. 2–3mm).
3. Lay Mesh – Press the mesh into the wet coating, ensuring full contact.
4. Overlap – Overlap adjacent strips by at least 10cm; 15–20cm at corners.
5. Apply Top Coat – Cover with a second layer of waterproof coating, fully embedding the mesh.
6. Smooth – Remove air bubbles with a trowel or roller.
7. Cure – Allow to dry per manufacturer's instructions.
8. Finish – Apply additional waterproof coating or protective layer as required.